Windows 7 still powers 184m commercial PCs

About 184 million commercial PCs – in small- and mid-sized businesses, in large enterprises plus government agencies – are still sometimes running the quickly ageing Windows 7, in accordance with Microsoft.

That number included all markets other than China, the provider said, in the largest percentage – 25 percent of PCs, or approximately 46 million – in the us alone.

Microsoft brought up the 184 million Windows 7 PCs earlier this year during its Inspire conference, where Redmond touted the partner opportunities during the home stretch in the Windows 7-to-Windows 10 migration.

Windows 7 is slated lower off support 14 January 2020. Then simply date, no security updates will be provided. To put it simply, most customers have just Eighteen months to get off Windows 7 and onto a more moderen operating system – Windows 10 is really the only choice – or risk leaving systems unpatched while at risk of hacking and exploitation.

Many companies have already now use Windows 10, Microsoft claimed. One of several other statistics it trumpeted at Inspire, Microsoft told us that there were 200 million commercial Windows 10 active monthly devices worldwide, or a little more than those still on Windows 7 (excepting the larger Chinese market).

Associated with the commercial PCs still on Windows 7, 50% were within enterprises, 30% in small- and mid-sized businesses, and 30% in government. Nearly two-thirds individuals machines were over the age of five years old, Microsoft said, a gold mine for partners bundling new hardware, software and services for patrons eager to deploy Windows 10.

Windows 7 and Office 2010: Microsoft Talks of Newest End-of-Life Refresh Cycle

The countdown clock is starting on a standard desktop configuration.

Such as it beat a drum around the perimeter of end-of-life deadline for Microsoft windows xp, Microsoft is now commencing to warn customers and partners that the popular desktop configuration’s time is fixed.

The new focus on the upgrade talk is Windows 7 and Office 2010. Was the last big cycle was through the extremely popular Windows XP desktop, which sought out of extended support in April 2014. End of support for XP’s follow-on, Windows Vista, arrived a few years later, but had not been a big deal given Vista’s comparatively low adoption.

Ron Markezich, corporate v . p . for Microsoft 365, started the Windows 7/Office 2010 conversation inside a keynote last week at Microsoft Inspire. “This move over the next few years represents a $100 billion chance of all of our partners,” Markezich said at Microsoft’s biggest annual gathering for partners from around the globe.

The deadlines longer support at the two products Jan. 14, 2020 for Windows 7 and Oct. 13, 2020 for Office 2010.

It’s for Markezich turn out to be the one to start the drumbeat this point. When XP was hitting end-of-life, the most important issue was security and compatibility. While XP was incredibly stable for one Windows release and offered solid performance on many applications until late in lifecycle, Microsoft was difficulties keeping the fermentation code up-to-date with evolving security threats, and compatibility with newer devices and applications was becoming problematic.

On this cycle, the alternate from Windows 7 represents a shift — should users keep with Microsoft — to the constantly upgraded Windows 10 across the OS side. About the Office side, the push is to try to get users for the desktop Office paradigm into an Office 365 subscription plus the cloud.

Tend to be under Markezich’s purview. He runs the Microsoft 365 business, the particular core of Microsoft’s Modern Desktop initiative and includes Windows 10, Office 365 and Enterprise Mobility + Security (EMS).

Expect a challenging sell from Microsoft from now through 2020 to possess those desktops gone after Windows 10 and Office 365.

Migrate SQL Server 2008 Database to Azure

That have an efficient database, it might be easy for the agency to manage and store data. MS SQL Server will be the first selection for users on the subject of data management. But nowadays, a gamers are migrating from SQL Server 2008 database to Azure SQL database. The biology behind this migration would be end of life support for SQL Server 2008.

Therefore, the SQL Server 2008 database users are trying to find a reliable straightforward method to move data from SQL Server 2008 to Azure which has no data loss issue.

Thus, we are going to, we are going to introduce a step-by-step system to transfer data from SQL Server to Azure SQL database in a trouble-free way.

Steps to Migrate SQL Server 2008 Database to Azure

The migration process is split into two steps; a person first will have to create a blank SQL database right after migrate SQL Server to Azure database using DMA.

Step 1: Make a Blank SQL Database

First, you are required to log in for your Azure portal.

Now, produce blank SQL database by pressing the Cause a resource contained in the upper left corner on the Azure portal.

From the popular page, select Databases. Select Create under SQL Database.

Afterwards, you have to fill the SQL database by entering the correct information to do with:

Database Name: mySampleDatabase

Subscription: Your subscription

Resource group: myResourceGroup

Select source: Blank Database

5. Now, to construct and configure a new server for your new database, click the Server. Fill out the newest Server form details when using the accurate information:

Server Name: Any globally unique name

Server admin login: Any valid name

Password: Any valid password

Location: Any valid location

6. Go through the Select button, which is present relating to the right side.

7. Now, to specify the service tier, lots of DTUs, and the variety of the storage, select Pricing Tier.

8. Pick the Standard service tier after which select 100 DTUs(S3) and 400 GB of storage.

9. Therefore, accept the preview terms to work the Add-on Storage option.

10. Mouse click on Apply after selecting the server tier, DTUs, and storage amount.

11. Choose a collation for the blank database. Here, make use of the default value.

12. After completing the SQL database form, please click Create to provision the database.

13. Now, around the toolbar, go to Notifications to be sure and examine the deployment process.

Note: Before moving towards step 2, it is advisable to create a server-level firewall rule. Also, check SQL server connection information.

Step 2: Migrate SQL Server 2008 Database to Azure

Open Data Migration Assistant. A computer owner can run DMA on any system making use of connection to the SQL Server instance has got the database. You needs to do the installation on the system hosting the SQL Server instance that user is migrating. The firewall rule that this user can establish must be for any system the amount he/she is running the facts Migration Assistant.
In recption menus on the left side, mouse on + New to create an exam project. Fill all the required details and after that click on Create:

Project type: Migration

Project name: Migrating Database

Source server type: SQL Server

Target server type: Azure SQL Database

Migration Scope: Select Encrypt connection and Trust server certificate per your environment.

3. Now, in the source server search for a single database to migrate to Azure SQL Database after click on the Next button.

4. Fill all the detail for the Select target page. Then pick the Connect button:

Server name: Your fully qualified Azure Database server name

Authentication type: SQL Server Authentication

Username: Your login name

Password: Password strength

Connection properties: Select Encrypt connectionand Trust server certificate depending on your environment.

5. Pick the database for the target server, that you will created in hmo’s procedure, after, to start dealing with database schema assessment process, choose the Next button.

6. Right after the source database schema assessment process ends, review the objects selected on your migration and study the object containing issue about the Select objects.

7. Now, to script the schema object in the source database, click the Generate SQL script option.

8. Then simply, you have to check out generated script after which you can click on Next.

9. You are required to click on Deploy schema as well as schema migration process will commence.

10. Big event completion of the migration process, read the results and then click on Migrate data.

11. Assess the tables selected for this migration on the Select tables. Now, select Start data migration.

12. The migration process will start. Once the migration process completed you will be able to access your SQL Server data in Azure.

Final Words

Most users check out a way to migrate the SQL Server 2008 database to Azure, nevertheless not able to get a reliable solution. Therefore, inside the above section, there are explained a step-by-step process to move the complete SQL Server data to Azure.

Windows 10 updates: Here’s how to get the newest features first with Skip Ahead

If you would like test the most recent features advancing towards Windows 10 you’re luck.

Microsoft has reopened the Skip Ahead branch of your company’s Windows Insider Program, which lets users test early builds of Windows 10.

By opting into your Skip Ahead branch, users gain access to new Windows 10 features before the listeners.

The downside is that Skip Ahead builds are less rigorously tested and is more prone to bugs than other Windows 10 builds.

Microsoft opened the Skip Ahead branch to new users on 23 July, but keep in mind spaces are restricted, and Microsoft will close Skip Ahead to new users whenever they have enough participants. Users who opted into Skip Ahead before 23 July will also need to rejoin.

If is the first to test Windows 10’s upcoming features sounds securing you, here’s how one can opt within the Skip Ahead branch within a Insider program.

Ideas on how to opt into Skip Ahead

1. If you don’t have a Microsoft account, first you need to create one by this link. If there is an account you’ll skip to step 3.

2. If the copy of Windows 10 isn’t linked to a Microsoft account, just go to Settings > Accounts > Your Info (probably selected automagically) and click on Log on with a Microsoft account instead. Now the details for a Microsoft account.

3. Next, make it possible for your computer for Insider builds, enroll in Settings > Update & security and click on Windows Insider Program and thereafter Get Started, as shown below.

4. Select the plus sign close to Link a merchant account, then select your Microsoft account thus hitting Continue.

5. It is in the heading What pace should you get new builds? select Fast in the dropdown menu.

6. Inside of the organization banner titled Let’s be clear, hit the Confirm button. Next hit the Restart Now button.

7. After the machine has rebooted, proceed to Settings > Update & security > Windows Insider Program.

8. In the heading What type of content do you need to receive? select the dropdown menu and pick Skip ahead to another location Windows release.

9. Press Windows Update inside of the side menu therefore the Check for updates button. Might take several hours or longer just before the latest build is posted.

How to handle Windows 10 updates

Baffled by how updates are employed in Windows 10? Join the club. This particular latest version on the operating system, Microsoft has transformed ideas presented once a straightforward procedure straight into a seemingly complicated method that varies as documented in whether you’ve Windows 10 Home, Windows 10 Pro or even enterprise or education edition. Because, there have been a great deal of misperceptions about how Windows 10 Update works, approaches to best employ it.

Unlike previous versions of Windows, Windows 10 doesn’t present you with the option to review pending updates and get not to install them (although, as you’ll see later on in this piece, utilization of exceptions to it). Instead, the updates automatically install around the schedule of Microsoft’s choosing. When updates are presented, Windows 10 automatically downloads and installs them.

On this article, develop to make things clearer for yourself. We’ve delved deep into Windows 10 Update are available up with ways of users’ most pressing questions: Whether you will need to accept all updates, whether it is easy to uninstall existing updates and the reduce the bandwidth some updates use. We’ve included as well some hidden extras, like how to stop all updates if you love.

We originally published piece of content in December 2015, nowadays we are updating it relating to the current release, the Windows 10 April 2018 Update. At any time you haven’t made the proceed to that new version of Windows 10, things might look or work a little bit differently for you personally.

Read on for details.

All updates aren’t created equal

You happen to be wondering: Why article that addresses the way to handle Windows updates individually suited to doing that in any Windows update? Not surprisingly, if you have installed the Windows 10 April 2018 Update, it wouldn’t seem you need assistance with handling updates. Simple answer: That’s accomplishment true.

In Microsoft-speak, you’ll discover updates there are also updates, prefer the April 2018 Update. Let’s infer those as major updates.

Microsoft employed to differentiate by making reference to “upgrades” and “updates,” but progressively, the word “upgrade” have disappeared through the lexicon.

But there remain differences between updates and major updates. Updates that aren’t major, similar to the updates of old, fix security issues, squash bugs and also relatively insignificant changes to Windows, typically it is in the hood. They’re delivered on Patch Tuesday, the Tuesday of a month, probably at other times if deemed too extremely important to wait.

Having said that, major updates, like yesteryear’s upgrades, “install the best new features, experiences and capabilities” of Windows 10, in keeping with Microsoft. Microsoft is now for the schedule to issue two major updates a year, approximately few apart. The first major update to Windows 10 was at November 2015. The most current was the April 2018 Update.

Why did Microsoft make everything an update? It’s tricky say, but when the company made the excellence between updates and upgrades, it didn’t always follow particular naming convention when describing the criminals to the public. By way of example, when Terry Myerson, Microsoft’s executive v . p . for the Windows and Devices Group, blogged on the Windows 10 upgrade in November 2015, he headlined it, “First major update for Windows 10 for sale.”
Windows 10 updates methods defer them

Although it may sound at the beginning as if Microsoft has completely taken domination of the update process, you actuallyhave some options. To look at whether any updates ended up downloaded and scheduled to generally be installed, select the Start button and pick Settings > Update & Security > Windows Update.

Thats liable to bring up the Windows Update screen, which shows any updates which has been downloaded, and additionally any that may be waiting becoming downloaded. Take a look at check to see if any updates at the moment are available mainly because the last time Windows checked youngsters, click “Check for updates.” Next to any update which downloaded even so, not yet installed, you’ll look at words, “Status: Awaiting Install.”

Although Windows 10 will automatically install the downloaded updates, you’ll have some control over as soon as installation arises, so that it doesn’t interrupt outstanding. On the Windows Update screen, click “Change active hours.” Decide on the hours you’re typically leftover computer. Updates won’t be installed during those hours. Note, though, how the total number of active hours can’t exceed 18.

Your components may or may not desire to restart in an attempt to install the updates. Typically, updates that add virus definitions for Windows Defender don’t require the system to restart, while other updates do. Your printer will restart to absolve installing the updates only during non-active hours. Additionally you even have a piece of control over that. If, for some reason, you want the downloaded update to instantly install, concerning the Windows Update screen click “Restart now.” Incase you want to have your personal machine restart at any specific time, click “Restart options,” and select the day and time one wants your PC to restart.

You can also ask Windows Update to lay not just updates to Windows 10, except for other Microsoft products, as well as Microsoft Office. To do that, along the Windows Update screen, click Advanced Options, greater than the feeling the “Update Options” screen seems, click “Give me updates for other Microsoft products photographs update Windows.”

You will find a workaround to the must-always-update-immediately rule – for people who have Windows Professional, Enterprise or Education. In those cases, you really have some control over pausing updates. To acheive it, click the Start button and choose Settings > Update & Security > Advanced options, go to the box “Choose when updates are installed.” This setting controls whether to defer the twice-yearly upgrade to Windows 10, strategies to do it. You might have two choices:

Semi-Annual Channel (Targeted): This enables you to specify the time after the upgrade is released you must wait before inatallation. In the box below them, you can choose what percentage of days you have to wait before installing, as high as 365.
Semi-Annual Channel: If you choose this, the upgrade is definitely deferred until after Microsoft has determined it’s ready for businesses to make. That usually takes between three and four months. That’s simply the starting point for your deferral, though. Contained in the box below this business, choose a number anywhere up to 365. That’s how many days the upgrade can be deferred after Microsoft says the upgrade is okay for businesses to run.

These settings apply and the twice-annual Windows 10 upgrades. You could defer the extra frequent Windows 10 feature updates. To accomplish it, go to the box marked “A quality update includes?-” and in the dropdown box find the number of days you’d like quality updates deferred. You’ll be able to choose as high as 30 days.

You’ll obtain an additional setting that’s somewhat confusing – the Pause update setting. Select this and this pauses updates for 5 days, except Windows Defender updates. Keep in mind this setting takes precedence across the settings outlined in the last several paragraphs.

There’s likewise a sneaky, little-known workaround for your version of Windows 10, including Home, may possibly prevent you from installing Windows updates entirely (aside from important security updates). People can’t do it with a case-by-case basis – either you install all updates or none by any means. And you can only accomplish it on PCs which happen to be connected to a network via Wi-Fi – in case you have an Ethernet connection, it won’t work.

To obtain it done, you need to tell Windows 10 that you’re during a metered connection – this basically means, that you’re charges by how much data you utilise. Click the Start button and pick Settings > Network & Internet > Wi-Fi / Manage known networks. On the screen that appears, scroll for a Wi-Fi network and click Properties. On the watch’s screen that appears go to the “Metered connection” setting and place the slider from Off and away to On.

When you finally do that, Windows will minimize the comprehensive data you use, and of the ways it’ll that is to prevent automatically downloading Windows updates. Take into consideration, though, that when you backlink to another Wi-Fi network, you’ll would need to turn that setting on for that network on top of that. If you don’t, updates could happen automatically.

If you’re powering a network via Ethernet, you can’t work with this technique.

And in the end, Windows Pro users can make use of the enterprise-level Windows Update for Business (WUB) tool to master the timing of upgrade increase delivery.
View your update history and uninstall updates

Although Windows 10 won’t mean you can pick and choose which updates to set up, you can uninstall some updates that create you problems.

Get it done, first see what updates seem to have been installed by clicking the very beginning button picking Settings > Update & Security > Windows Update > View update history. You’ll take in a list split into five sections: Feature Updates, Quality Updates, Driver Updates, Definition Updates as well Updates. The Feature Updates section shows the major updates – to provide an example, the Windows 10 April 2018 Update. However, don’t count on seeing that in plain English in the Feature Updates section. Instead, you’ll read the version number Microsoft uses to refer to the upgrade – Windows 10, version 1803 in the April 2018 Update, like.

The Quality Updates section lists the harder mundane, plus more frequent, updates to Windows that fix bugs, improve security and add minor features. Driver Updates, like the name implies, shows each of the drivers which updated. Definition Updates lists the different antivirus and anti-malware updates for Windows’ built-in anti-malware tool. Other Updates lists miscellaneous updates, as an example to the Windows Malicious Software Removal Tool.

You have information about any one of the updates slightly differently, conditional on whether you’re on the lookout for details about a component update, a top update, a definition update, an individual update or even “other” update. For feature updates, located on the “View update history” screen, head to the Feature Updates section, try to find the update you just want details, and under the date it absolutely was installed, click “See what’s new in such an update.” For quality, definition, driver or another updates, visit the appropriate section, search for the update for which you want details, and then click it.

Should you click to buy details about an attribute update, you’ll be delivered to a page full of tips, videos along with other content regarding update. For quality, driver, as well as other updates, you’ll be sent to a web page which has a detailed written description of your update. With definition updates, you’re meant to be sent to an online page accompanied by a detailed written description within the update. However, eachtime I’ve tried this on two separate PCs, I’ve received this particular error message: “We are sorry, the page you requested can’t found. The URL is probably misspelled or even the page you’re looking for is no longer available.”

You might want to uninstall an upgrade like Windows 10, version 1803, classified by Feature Updates, you’ll ought of do it within 10 days of the upgrade being installed. Afterward point you’re out of luck; the update will stay. If you do are going to uninstall it because 10-day time period, look at Settings > Update & Security > Recovery. Inside “Go back to the first kind version of Windows 10” area, press the “Get started” button and move on to the series of prompts.

While you might want to uninstall the upgrade throughout the 10-day period, however, the “Go straight into the previous version of Windows 10” selection may appear. If that’s the scenario, you won’t learn to uninstall the update. The choice won’t appear if your main Windows.old folder has become deleted. That folder sports previous type of Windows, whenever it’s not there, you can’t revert to the previous version.

You can easlily, however, uninstall updates marketed in Quality Updates, Definition Update, Driver Updates, and various other Updates. To get, select Settings > Update & Security > Windows Update > View installed update history. To uninstall an update, click “Uninstall updates” opening into the screen. On-screen that appears, pick the update you really want to get rid of, then click Uninstall.

Note, though, that you just won’t be able to uninstall all updates. Not many update placed in the “View installed update history” may on the screen that lets you uninstall updates, also, you can’t uninstall any that don’t appear there. Then when you click some updates which do appear on the uninstall updates screen, the uninstall button vanishes.

Sometimes, you may be able to make sure that Windows 10 won’t reinstall the update you’ve uninstalled, making use of a free Microsoft tool to truly hide it from Windows Update. To make, go to this Microsoft support page, scroll toward the lowest and click the “Download the ??Show or hide updates’ troubleshooter package now” link. Install the download, click Next, and refer to the manual for hiding the update you don’t want reinstalled.

Fall into the fast lane while using the Insider Program

You might be the kind of person who must first within a technology know and needs the latest sort of Windows before its general release? If that’s, you’ll want to get involved with Microsoft’s Windows Insider Program. Whenever do that, you’ll get the latest Windows updates before everyone else. Keep in mind, though, that any time you do this, you’re somewhat of a guinea pig, because Microsoft uses the system to find bugs and troubles updates.

If it’s something want to do, head to the Windows Insider page and apply. Then on your computer, click the Start button, select Settings > Update & Security > Windows Update > Windows Insider Program and then click Get Started. You’ll quote that you’ll workout on software that might stop being fully tested. If you should still prefer to go ahead, click Next.

Following that comes an even scarier discovered that warns you that “if you ever want to stop receiving Insider Preview builds you need to remove many techniques from your PC and reinstall Windows.” If you’re still unafraid, click Confirm. You’ll then require to restart your printer.

After your computer or laptop restarts, choose the Start button and select Settings > Update & Security > Windows Update > Windows Insider Program. You’ll see within your “Get Insider Preview builds” section that you’ll now receive Insider Preview builds.

There is a choice of getting the Insider Preview builds the moment they’re released or after they’ve been tested a short time (but before they’re released for the general public). Microsoft calls these options the “fast ring” and “slow ring.” To decide on one of the rings, with the “What kind of content so you’ll want to receive?” section, select “Active Growth of Windows.” Then around the “What pace do you wish to get new builds?” section, choose either the Fast or Slow ring. Suddenly, you can return here and switch with regards to.

You have another variety choices way too, separate from rapid and slow rings. During the “”What kind of content do you desire to receive?” section, the dropdown menu offers these 3 choices:

Just fixes, apps, and drivers. Select this and instead of just getting any new Windows builds swifter, you only get bug fixes, driver updates and app updates more rapid.
Active development of Windows. Choose this, although outlined previously, you obtain the choice of being included in the fast or slow ring for updates.
Skip ahead to another location Windows release. Choose this, you skip over the previews for an additional upgrade of Windows, and instead you get previews for the upgrade then simply. Note that you’ll only get these updates within the point whenever the next Windows upgrade is finished so with few previews left, additionally, the version beyond this concept is in very early development. There’s a good chance that this selection won’t can be found in the dropdown menu, because Microsoft has limited a lot of people it allows into the Skip Ahead program and hasn’t been letting new folks in for quite some time.

To opt apart from getting Insider Preview builds, click “Stop Insider Preview builds” at the pinnacle of the screen. You have got three choices constitute the screen seems:

Move to a less risky and much less frequent schedule. You should pretty much ignore excessive, because and also you extremely confusing, but it really uses terminology that Microsoft abandoned at the end of July 2017, that’s why it duplicates the settings described from the three previous bullet points. So don’t bother to click.
Pause updates to obtain bit. Click on this link and from your screen seems move the slider from Off to On, and you’ll pause updates from being installed for one week.
Roll me returning to the last Windows release. This selection brings someone to the Settings’ Recovery section which lets you roll your computer back to the newest public version of Windows. So you’ll remove all preview releases and go back to being on the ordinary Windows update schedule.

Stop Insider builds completely. Choose this, and you’ll a lot more get Insider builds.

Use peer-to-peer networking to add updates

In terms of updating Windows 10, Microsoft borrowed a way from peer-to-peer networking apps most notably BitTorrent so that you help distribute updates more effectively. If you want, you could tell Windows 10 that you’d like updates delivered of their PCs via peer-to-peer networking besides getting them from Microsoft servers.

Why should you want to do this? If you have multiple Windows 10 PCs on a network, it will save bandwidth, the update may very well be delivered from Microsoft’s servers to at least one PC as part of your network, feeling that PC can then deliver the update to the other Windows 10 PCs.

To produce this feature on, click the Start button and choose Settings > Update & Security > Windows Update > Advanced options > Delivery Optimization. Using the “Allow downloads organization PCs” section, slowly move the slider to On, then choose “PCs on the local network.” Before you choose “PCs on my local network, and PCs on-line,” the PCs for your network may get updates using PCs using the web – but your PCs will also send updates to the telltale other PCs furthermore, and so you will finish up using additional bandwidth.

Stay tuned for more

We’ll be covering every one of Windows 10’s upgrades and updates a lot more. To get info about every update to Windows 10, stop by Windows 10: Strategies for the updates. For particulars about every preview form of the next version of Windows, see Windows 10 Redstone: Choose the builds. It’s also possible to dig into in-depth considers every Windows upgrade – for illustration, our analysis the Windows 10 April 2018 Update. Just in case Microsoft makes any alterations in its upgrade/update policy while doing the mission, we’ll include them today, so check back.

Windows Updates KB4345418 and KB4054566 Supposedly Causing New Issues

Microsoft presented a new batch of updates for Windows computer operating systems on July 16 to try and fix a number of bugs introduced by Patch Tuesday updates, additionally the same time, to help increase general performance.

But as it turns out, as much as two of these updates are causing more issues on systems where they’re installed, including high CPU usage and RDS connection problems.

To start with, the updates you are using are KB4345418 and KB4054566. KB4345418 is mostly a cumulative update released for Windows 10 Anniversary Update (version 1607) and Windows Server 2016, while KB4054566 is pushed to devices operated by Windows 8.1, Windows RT 8.1, and Windows Server 2012 R2.

“New updates, more problems”

Depending on new reports, KB4345418 may decay Azure Active Directory Connect (AADConnect) by resulting in a 100 percent processor load at random times.

“Even together with the updated patch on Server 2016 (KB4345418) still is causing issues with AADConnect servers that a 100% CPU spike on several Health and Reporting monitoring services, only fix right here to uninstall the modern update. Each day . to impact as a minimum 2012 and 2016 servers,” one user is that it is cited as saying inside of a post on AskWoody.

Also, there are other bug reports suggesting that taking out the updates resolves these issues, with some claiming that Remote Desktop Services also fail after installing the Windows 10 patch. Again, uninstalling the update can be the solution that does the trick, though this will mean that systems remain without the recent fixes released by Microsoft.

The batch of updates for Windows devices is projected to be released on August 14 when Microsoft begins an important Patch Tuesday rollout, on the other hand company may additionally deliver more fixes meantime.

The company, however, is yet to spot these new problems reported by users with the July 16 updates.

Windows 10, Windows Server 2019 to possess Leap Second Support

Microsoft gives officially support “leap seconds” in Windows 10 and Windows Server editions, the company has revealed today.

Leap seconds are one-second adjustments which will Coordinated Universal Time (UTC) to keep Earth period in sync with solar time.

The main reason leap seconds appear can be due to irregularities within a Earth’s rate of rotation. Leap seconds seem to have been accounted for since 1972, and they also typically happen every 18 months.

When they do happen, one second is added by the end of the last minute during the day the leap second happens, or one second is subtracted right after the leap second is negative (hasn’t ever happened).
No “time smearing”

Microsoft the majority software engineers have been aware of leap seconds for several years, but haven’t so much bothered to allow them, with Linux creator Linus Torvalds once telling visitors to chill out about “leap seconds.”

Speculate software, and especially Windows, became an integral part of our daily lives and our critical infrastructure, US and EU regulators have issued orders that any software that handles critical tasks have got to be able to synchronize to UTC time making use of very low margin of error, to ensure that it can execute critical tasks synchronized with other equipment.

To help comply with this requirement and improve Windows’ time accuracy, Microsoft is updating upcoming versions of Windows 10 and Windows Server 2019 to help for the missing leap seconds.

As indicated by a GIF authored by Microsoft showing a Windows Server 2019 Insider Build, by doing this a leap second will likely be added. Notice how this clock goes from 59 seconds to 60, in support of then returns to the normal 00.

Right here is standard way of adding a leap second. Microsoft said it was not aiming to support the practice of “time smearing,” which consists of adding small time additions to standard time across days to would be the the leap second without adding real second at a time.
PTP support traveling to replace old NTP

Leap seconds support will now be being put into Windows 10 Redstone 5 and Windows Server 2019.

Leap second support belongs to a larger group of new time-related features that Microsoft announced for Windows Server 2019 at the blog post published today.

Other new time-related features include more accurate software timestamping, better performance timers, and support relating to the new Precision Time Protocol (PTP), a new for the old Network Time Protocol (NTP).

How to set notification priorities with Focus Help in Windows 10

The Windows 10 April 2018 update includes many new and improved features, many of which you will notice immediately. Other latest features may reveal themselves in unexpected or undesired ways if you can’t take the time to tweak and adjust them. That’s what exactly is a needs to be done whenever there is a major update to Microsoft Windows 10.

Focus Assist is regarded as a Windows 10 feature enabling users to **cr** regulate how and when the computer itself notifies them of newly received email, messages, messages or calls, and alarms. Developing set priorities and adjust its configuration, Focus Assist can block certain notifications, which enables you to concentrate on the task open to them without being disturbed by the flurry of unrelated activity.

Focus Assist provides Windows 10 users a lot easier flexibility, it’s a great idea; however, for the majority of users, the default settings will demand a bit of tweaking. This brief how-to tutorial will advise you how to access Focus Assist and adjust its configuration settings to ensure that it operates a task want it to operate.

Focus Assist

To access Focus Assist, open the Windows 10 Settings screen located on the Start Menu. From Windows Settings, choose the System link. Use a left navigation bar and then click the Focus Assist link.

Pointed out, the default setting would be to receive all notifications, which are often very annoying. By clicking the Priority Only button, you can easily restrict notifications they only need to the activities the ones you deem as being important. Click Customize Your Priority List to talk to your choices.

By having a list of priority people of the contacts, you can limit interruptions up to a select few. You too can place limits upon which apps are likely to be allowed to ship notifications. Oddly, the default apps refer to Xbox, generally never would like to be notified about.

You should configure Focus Aid to notify you of alarms only, eliminating notifications stemming from emails and messages. This setting supersedes your priority settings and produces the least array of popup notifications.

Under Automatic Rules, you are able to configure Focus Help you be active during certain durations, or when certain applications are running, or awhen specific activities think about place. Left-clicking in the text of the aforementioned settings will let you adjust their details.

The setting in Focus Assist is the toggle switch which is able to provide you with a introduction to every notification Focus Assist held for your situation while it was on, if you desire. But be forewarned: Depending on how long the app can be active, this list could be extensive.

Personal preference

The key Assist app which is added to Windows 10 with the April 2018 Update will provide you with a significant amount of flexibility if you’re considering system notifications. Perhaps you want to see every notification, while possess . you may want simply no disturbances. With Focus Make it easier to can set priorities and just have it how you would want it, when you’d like it.

Windows Server Quorum Types of SQL Server Clustering

If you are planning to try a high availability cluster to protect SQL Server, you need to understand your Windows Server cluster quorum options. I explained these options at the recently recorded webinar which can be available here. It’s also possible to be interested in absolutely free white paper, “Understanding Windows Server Quorum Sources for SQL Server Clustering” Here are some Q&As in the session.

Q: If we have a three-node on-premises cluster running Windows Server 2012 R2 how can you put another node within your Azure cloud and failover going without? Azure node?

A: Yes. You might creating a four-node cluster. That you have three nodes on premises, one node through the cloud. If you’re doing a failover cluster instance on premises, and you want to replicate that around the cloud with SIOS DataKeeper. It all node can be component of the same failover cluster instance. In the event you’re leveraging Always On Availability Groups (AOAG), adjusted SQL Server 2016, you are allowed to get three replicates with automatic failover. One more node would be an asynchronous replica for disaster recovery. Because configuration, finito, no more automatic failover compared to that node, but you can manually recover ways to that fourth node. Be aware regardless of whether you’ve Always On Failover Clustering Instance (FCI) or AOAG, all 4 of your nodes will have fun playing the same cluster. Automagically, they will all engage in the quorum configuration. Which are a formula cluster. Wind up a witness. You can still leverage the Azure cloud witness, settle down ! witness would reside in Azure. That has you a really large level of availability, even if you entire Azure stack contained in the Azure cloud inclusively went away, people only lose two votes. You still need three votes on premises, so that on-premises cluster would continue to keep work. The dynamic quorum would begin working and change 5 various votes to go three votes, to ensure you still have a remarkably high level of availability. A more likely scenario is certainly not the entire Azure cloud would disappear, but which fiber outside home gets cut, so you lose connectivity to the net. That’s a horrendously expensive scenario. You can still have an exceptionally highly available configuration on premises. Even that catastrophic failure wouldn’t affect your availability on premises. Now, understand what want to leverage the Azure cloud witness, is dependent upon can’t make use of it because you stay running Windows Server 2012 R2, for those of you is to put a file share witness on premises. Use another little server to create a file share witness. That offers you all four votes of an cluster on-premises. Those that lose the total site, in a very catastrophic failure. Node four it is here. After all, it’s not going to failover automatically given that it can’t go ahead and take quorum, If you lost four out of five votes, you’d utilize an easy, well-documented method to simply force the quorum online to this cloud witness. Essentially you restart the cluster service by using a /fq switch for force quorum, and you would be back up and running pretty quickly.

Q: At any time you failover from an on-premises SAN-based cluster on a node in the cloud, will probably be the SAN storage for under the local machines? Internet site a separate wide range storage within the cloud, or possibly is the cloud server able to access the SAN storage?

A: In the event you’re using FCI, then three nodes, on premises, shall be attached to the local SAN. Now, for those who weren’t replicating toward the cloud, then you’ve got a few options. When a fourth node is incorporated in the cloud, there is not any way for you to use any SAN-based replication solution like EMC, SRDF. Which isn’t possible for anyone who is considering the cloud as you have no access in to the storage and odds are good you’re not using the same brand of storage anyway. You possess use software-based replication like SIOS DataKeeper. This particular scenario, your three nodes all share a lone disk on premises (your SAN), and SIOS DataKeeper simultaneously produces the data individual fourth node – keeping many storage synchronized. Added bonus node may have local attached storage perhaps it’s in within the Azure cloud, perhaps it will have premium disk, and in AWS, it may be an EBS provisioned IOPs storage device. The DataKeeper software is storage agnostic so it will replicate on the storage. As an instance, you have a SAN and your cluster uses an E-drive for a few people files, along with an F drive for only a terabyte of your information. You should have an E drive with an F drive on those four, and any one one should manifest as a terabyte in size guaranteeing that we can mirror specific node.

Q: Are you able failover and failback sometimes you may have a cluster with both on-premises nodes particularly SAN and nodes the cloud?

A: Yes. When using FCI and SIOS DataKeeper software, SIOS integrates with failover clustering so as that when the DR server comes online, it will be the source belonging to the mirror. Anything written around the DR node will undoubtedly be replicated returning to the on-premises cluster automatically. Suppose you had a massive power failure on your primary data center which was going to be offline for a while. You could enact a catastrophe recovery plan, the places you configure your DR node to return online automatically. With SIOS DataKeeper, in case you choose asynchronous replication you still need an excellent RPO. If your RTO is more important than your recovery point objective, then configure automatic failover in the direction of DR node. Should you that, you imagine that in the event of a catastrophe, you can tolerate potentially losing two or three writes. Until you want automatic failover, it is easy to configure a manual failover , too. That way yourrrre able to control if you should pull the switch and bring the node online Once your DR node comes online, you could run your SQL Server there to get a day, every week, or a year. SIOS DataKeeper tracks of the rights inside the intent log, the industry small fixed size file. After the primary data center returns online, DataKeeper will detect it automatically, initiates a partial resync, so just the blocks which all have changed could be sent over. Once it reaches one state, the administrator bring the cluster back online during your primary data center, and operation will change automatically for your personal primary node in their failover clustering.

Q: When you have had multiple nodes in a very cluster, can there limitations with clustering as long as what can be accessed due to the RAM and CPU limitations – is actually it depending on the Windows operating system while the version of SQL Server?

A: Make sure you size each cluster node similarly. Before Windows Server 2008, to end up being supported, your cluster must be built with components on Microsoft’s hardware compatibility list. With Windows Server 2008, they replaced the hardware compatibility list accompanied by a cluster validation tool. At the time you build a cluster, you operate this tool, also it looks at each node, together with networking, storage, service pack levels, along with a variety of everthing else and it calls out configuration options or any hardware issues of concern. Rrt is going to tell provide you warnings or failures. To watch warnings, you have got to understand what they’re warning you about. To illustrate, in most cloud configurations, you’re only using one network interface card, and additionally they will call that out being potential single point of failure. Well, young children and can in virtual environments that that Virtual NIC is sometimes backed by multiple physical NICs, that makes it not a anchorman of failure. You cannot find any set rule you’ll want to have x massive number of RAM, or this CPU provided that pass cluster validation and you are obviously confident your hardware can meet the requirements of your application. Guarantee your machine is powerful enough to the workload. Don’t make node one a 16-core great server starting a very important SQL Server workload, and then make your backup server a previous laptop. Ideally, your secondary node needs to be same design of server. Just learn that you’re going to will have to run that workload sooner or later and there is no denote failing to the site a node that can’t handle the workload. If you find yourself running in any cloud environment it is possible to “cheat” on the sizing a bit more to save on infrastructure costs. The nice thing about the cloud you can provision a reduced instance than you could in a physical server environment. You happen to be paying per core outside the cloud. Although that server has to be running, buy pay for 16 cores, 24/7, Twelve months a year. It’s possible to scale that down to the minimum that you want for a successful failover. In the case of a disaster, just a couple of a couple minutes to generate your cloud node. You could go from a D1 instance in Azure for a G5 instance providing it stays in your same family. Pc open up the Azure console and decide “make this a G5” and will also reboot the server. If you have a disaster, another little while is typically acceptable. Now you’re only finding money larger instance size in the event you actually need it.

Journey from MS Access 2016 to Sql Server 2016


We often find ourselves during a situation where organic meat want to dive towards SQL Server Ocean after generating a few degrees of tables in MS Access. Such things happen like that attributable to some spicing materials or conversations we normally have with colleagues, well that sounds created by world to some readers, but it really really happens. Brought about by some challenges, I went through once i was upsizing my MS Access 2016 to SQL Server 2016, I’m now compelled to express my experience to be able to those who are during the process of starting the said journey above.

Common Way in which Upsizing MS Access

SSMA is known as a more generic tool when compared to Upsizing Wizard (Not included in MS Access 2016) as well as designed to migrate data from various databases into SQL Server. SSMA is free and can be downloaded coming from a Microsoft sites. When you finally download and install SSMA on just the 64-bit version of Windows, you may find two program shortcuts, one for 32-bit Access as well other for 64-bit Access. By trying to run an incorrect version, you will discover a message warning that you are currently running the incorrect version of SSMA with the available Access libraries.


As you install SSMA, ensure that your system meets the accompanying requirements:

Windows 7 and even a later version, or Windows Server 2008 and a later version.
Microsoft Windows Installer 3.1 and even a later version.
The Microsoft .NET Framework version 4.0 or possibly a later version. The .NET Framework version 4.0 can be obtained on the SQL Server product disc, through using information around the Microsoft .NET Guide.
Access to and sufficient permissions via my pc that hosts the prospective instance of SQL Server/SQL Azure DB to you ought to will be migrating database objects and data.
Microsoft Data Access Object (DAO) provider version 12.0 or 14.0. You could potentially install DAO provider from Microsoft Office 2010/2007 product or download it from Microsoft web.
The SQL Server Native Access Client (SNAC) version 10.5 and above for migration to SQL Azure. It’s possible to obtain the latest version of SNAC from Microsoft? SQL Server? 2008 R2 Feature Pack
4 GB RAM (recommended).


Thats usually where the first killer punch is! I emphasize, please remember of which Microsoft Data Access Object (DAO) provider version is best with your situation. Which will help our novice programmers, please utilize the following:

(1) If you are migrating an MDB, then use Microsoft Data Access Object (DAO) provider version 12.0, to receive this version you ought to install MS Access run-time 2007.

(2) If you’re going to be migrating an MS Access 2016 ACCDB, then use Microsoft Data Access Object (DAO) provider version 14.0. In order to get this version it’s good to install MS Access run-time 2013.

If by mistake you pick Version 12.0, then feel safe that all your youngster tables will likely be rejected including your app will not linked
Because in principle have the ability to install MS Access run-time 2016 with the full version 2016, certainly still have some teething problems here, your closet candidate may be MS Access run-time 2013, however be prepared to the read-only or uneditable sub-forms after linking your back- end.

Check sub-form forms having the following symptoms after linking

Not editable
Error with formulas
Invisible datasheet
Uneditable record source queries


Open your record sources for your personal affected sub-forms:

Go to individuals queries properties and modify the property called all out-put – from No to Yes

Then save all changes, this would sort out the sub-form problems and everything is definitely back to normal as usual. Reasons why this error occurs is because of him the MS Access 2013 we use in fact it is lower than 2016.

Procedure 1

As you seek ahead with all the above tool, make sure that your application is thoroughly tested or error-free, for illustration, check the following:

All your queries arenrrrt using calculated fields stored from the local tables, once you allow that, the Sql- server won’t recognize those control fields, they just be assigned data type like float, that may distort your reports because nothing can be pulled in your reports because of queries.
Check any malfunctioning reports out of your users and clear them first
Ensure the entity relationship is tested and sound
Ensure which are a thorough advice about the SSMA project creation
Ensure you have the capacity to look at the errors that sometimes occur during migration, when you don’t, please make contact with your books and update oneself that knowledge gap.

Procedure 2

Subsequent to the above procedures are done, then you can now migrate your MS Access table to one’s SQL Server 2016.

When linking the tables take advantage of the correct ODBC drivers to illustrate for MS Access 2016:

Use Microsoft ODBC Driver 13.1 for SQL Server. Always Encrypted could be a new SQL Server 2016 and Azure SQL Database security feature that prevents sensitive data from being seen in plaintext in an exceedingly SQL instance. Pictures transparently encrypt the data within application to make certain that SQL Server or Azure SQL Database is handle the encrypted data terrible plaintext values.

When an SQL instance or host machine is compromised, an attacker can easily access ciphertext of your sensitive data. Build ODBC Driver 13.1 to encrypt plaintext data and store the encrypted data in SQL Server 2016 or Azure SQL Database. Likewise, utilize driver to decrypt your encrypted data. Azure Active Directory (AAD)


Please be certain that the data type is correct would like to migrate your tables manually, otherwise, I strongly recommend to novice programmers make use of the SSMA tool described above okay can handle the 10% remaining work. Would like to ignore this, it is always as good as seeking to cross the Atlantic Ocean with a bicycle, and you know what this would mean!

Access SQL Server
Text nvarchar
Memo nvarchar(max)
Byte tinyint
Integer smallint
Long Integer int
Single real
Double float
Replication ID   (guid) uniqueidentifier
Decimal float
Date/Time datetime
Currency money
AutoNumber int
Yes/No (Boolean) bit
OLE Object varbinary(max)

Be warned I rest my case here.