Update: After pausing the rollout from the update and extensively testing the software to make sure most issues have been fixed, Microsoft has now made the Windows 10 October 2018 Update once more open to download. We will keep updating this guide with any new issues we discover.
Many people have reported they have encountered Windows 10 October 2018 Update problems since downloading and setting it up.
If you’ve been encountering Windows 10 October 2018 Update problems, we’ve your back. We’ve gathered up all the Windows 10 October Update problems and fixes the following, so you don’t have to go on an internet scavenger hunt just to make use of your PC.
However, if you are struggling with a Windows 10 October 2018 Update problem that we haven’t covered, follow and tweet us and we’ll do what we can to locate a solution. We’ll also continue to update this short article with all the latest problems and fixes whenever we hear about them.
Probably the most headline-grabbing problems the Windows 10 October 2018 Update has faced is that it would delete files from hard drives. That was definitely a worrying problem, but it looks to possess been patched out. But, in either case, you need to backup your device before installing the Windows 10 October 2018 Update just in case. Plus, the Windows 10 October 2018 Update should perform better, now that Microsoft has released a patch softening the performance hit from Spectre patches.
Audio issues after installing the Windows 10 October 2018 Update
Numerous people have found they were experiencing audio problems after installing the Windows 10 October 2018 Update. This issue was because of incompatibility with an Intel driver.
The issue was widespread enough that Microsoft has acted to fix the issue. Now there is an update that you could download via the Windows Update app that addresses the issue.
Windows 10 October 2018 Update causing Blue screen of death of Death
One of the most severe problems we have seen with the Windows 10 October 2018 Update related to HP computers. A cumulative update for the October 2018 Update (which includes fixes for previous problems) was causing the dreaded Blue Screen of Death before crashing HP laptops and computers.
It appears the issue was the result of a keyboard driver, along with a new update has been pushed by Microsoft to deal with the problem. It should download automatically. If not, open up the Windows Update app and appearance for just about any pending downloads.
Windows 10 October 2018 Update has deleted files
One of the most serious issues to ever affect a Windows 10 update appears to have occurred, with multiple people reporting that after installing Windows 10 October 2018 Update, files stored in their “Documents” folder go missing.
The problem is severe enough for Microsoft to pause the rollout of the October 2018 Update, which shows just how seriously Microsoft is taking this issue.
The issue hasn’t affected everyone – we’ve not experienced the problem on the PC we updated – however, you should look at your Documents folder to ascertain if your files are missing.
If they are, then Microsoft suggests calling “our support line. They’ve the various tools to get you to a great state.”
In america, the Microsoft support number is (800) 642 7676 or (800) 892 5234.
In the united kingdom, call 0344 800 2400.
In Australia, call 13 20 58.
For the support number in other countries, check Microsoft’s website.
In case your computer is affected, then Microsoft suggests you minimize the use of the affected device and refer to them as as soon as possible.
How you can fix Windows 10 October 2018 Update installation problems
If you’re encountering problems installing Windows 10 October 2018 Update via Windows 10’s update tool, don’t panic. Windows 10 has a built-in troubleshooter that can help identify any problems. This can also reset the Windows Update app, which can help kickstart the installation.
To get this done, click the Start menu, then click the cog icon around the left, which will open up the Settings window. Click ‘Update & Security’ then ‘Troubleshoot’. Click on ‘Windows Update’ then ‘Run the troubleshooter’ and follow the instructions, and click on ‘Apply this fix’ if the troubleshooter finds a solution.
Release disk space
As with previous major updates for Windows 10, the October 2018 Update requires a specific amount of hard disk space to ensure that you download and install. In case your main hard disk (where Windows 10 is installed, usually the C: drive), is nearly full, then you’ll encounter problems when trying to install Windows 10 October 2018 Update.
The October 2018 Update requires 16GB of free space for that 32-bit version, as the 64-bit version needs 20GB on the hard drive where Windows 10 is installed.
So, the first thing you want to do if the Windows 10 October 2018 Update install fails is to look at your drive space in Windows Explorer. If it is not having enough space, try keying in “Disk Clean-up” within the search engine on the taskbar and select the system disk (normally the C: drive).
Click ‘OK’ then choose the tick boxes from the files you want to delete. These should be safe to remove, but don’t forget you can’t retrieve them once they’re gone. You’ll find out just how much space you’ll save. Click ‘OK’ then ‘Delete files’ to get rid of the files. If you wish to create more space, click ‘Clean up system files’.
Once that’s done, try downloading and installing the Windows 10 October 2019 Update again.
Disable anti-virus software
Antivirus software is certainly helpful to have, however it can sometimes cause problems when attempting to install the Windows 10 October 2018 Update.
For those who have antivirus software installed, try disabling that before trying to set up the Windows 10 October 2018 Update, as that may repair the problem. Next enable it and use it normally when the installation has completed.
You may even have to uninstall the software temporarily. Just be sure that you reinstall it when the update installs successfully.
Reset the update
If you are still experiencing problems when attempting to set up the Windows 10 October 2018 Update, then you may need to reset the update service and try again.
To do this, open up the Command Prompt by typing in ‘CMD’ in to the searchbar and right-clicking on ‘Command Prompt’. Select ‘Run as administrator’.
Once open, enter in the following, pressing Enter after each line:
net stop wuauserv
net stop bits
net stop cryptsvc
Ren %systemroot%\SoftwareDistribution\SoftwareDistribution.bak
Ren %systemroot%\system32\catroot2 catroot2.bak
net start wuauserv
net start bits
net start cryptsvc
Afterwards, restart your PC and try installing the October 2018 Update again.
Apps, including Edge, don’t connect to Internet after installing October 2018 Update
It looks like there’s a common Windows 10 October 2018 Update problem where Windows 10 apps, such as the Edge internet browser, no longer work once the update installs.
Following the October 2018 Update being installed, all Microsoft Store apps fail to connect to the web, together with Edge.
The browser displays an error once the user tries to navigate to some website, meaning that rather than the site popping up, the consumer receives the message: “Hmmm… can’t reach this site.”
That’s certainly an annoying issue. Microsoft has detailed a solution, however, explaining you need to enable IPv6.
To do this, open up Settings, then go to Networking & Internet > Network and Sharing Center. Select your network adapter here, then click Properties, visit the Networking tab, and tick this area next to Internet Version 6 (TCP/IPv6). Then click Alright to save the alterations.
iCloud won’t install or sync after installing October 2018 Update
Apple and Microsoft have found that iCloud is no longer suitable for Windows 10 October 2018 Update, which means people with the October 2018 Update installed cannot install iCloud for Windows, and if it is already installed, it does not sync properly.
Apple and Microsoft will work together on the fix, so for the time being you will need to wait for an up-to-date form of the software to be sold.
Microsoft has also prevented individuals with iCloud already installed from updating towards the October 2018 Update before the concern is solved. If you’ve been not able to install the October 2018 Update, this might be why.
While it’s annoying, we think it’s the right move, as it means you can continue to sync your files to iCloud for the time being.
Windows 10 October 2018 Update installation problems with Intel CPUs
There has been reports the Windows 10 October 2018 Update runs into problems with some newer Intel CPUs. It seems that it has compatibility difficulties with Skylake (6th generation) or newer Intel processors.
Apparently, the issue is caused by the Intel Display Audio driver for many of these chips, and Microsoft notes that it may lead to excessive processor usage, along with reduced life of the battery.
For those who have a chip that’s affected by this, a window can look saying “What needs your attention” and warns that the Intel Display Audio driver causes stability problems and will also be disabled.
You will see a ‘Confirm’ button, but don’t press it, because the Windows 10 October 2018 Update will fail.
Microsoft looks right into a fix, and has place a block around the update installing on affected machines.
Intel has said that this affects some Skylake or newer chips, using versions 10.25.0.3 through to 10.25.0.8 of this particular driver.
However, for those who have Intel Graphics Driver 24.20.100.6286 or better on your PC, this reportedly already contains the fix for the issue (as it runs with version 10.25.0.10 from the Intel Display Audio driver). Which means you ought to be fine if this sounds like the situation, and no warning message should pop up.
How to fix Windows 10 October 2018 Update Wi-Fi and internet problems
Many people have observed problems connecting to the internet or using Wi-Fi after installing the Windows 10 October 2018 Update. If you’re not able to access the internet, adopt these measures.
First, open Settings and click on ‘Update & Security’, then click ‘Troubleshoot’. Select ‘Network Adapter’ after which ‘Run the troubleshooter’.
A window will appear asking you which adapter to fix. Choose the one you’re through an issue with (for example, Ethernet if you are connecting to the internet using a cable from your PC, or Wi-Fi if you’re doing the work wirelessly), then click ‘Next’.
Windows 10 will then run various tests to diagnose and solve the problem.
If you’re still having troubles with Wi-Fi, open up Settings and go to ‘Network & Internet’. Click ‘Status’ then click ‘Network reset’.
In the window that opens, click ‘Yes’ to verify, then restart your computer.
How to fix October 2018 Update 0x800F0922 error
When the Windows 10 October 2018 Update fails with an 0x800F0922 error, this may be as you have an active VPN connection that’s disturbing Windows 10 contacting the update servers. To fix this issue, disconnect from the VPN server and check out again.
If you don’t understand what a VPN (Virtual Private Network) is, it means you probably don’t have a connection, but check with your IT administrator.
This error can also occur when the System Reserved partition in your hard disk is full or not large enough. A 3rd party software tool can help you resize your partition.
Install the Windows 10 October 2018 Update via USB
If you’re still having problems downloading and installing the Windows 10 October 2018 Update, you should attempt installing it from the USB drive.
You’ll require a blank DVD or a USB stick to add some installation files, with a minimum of 5GB of spare space. If you don’t possess a spare drive, check out our listing of the best USB flash drives 2018.
Download and install the tool, then open it up and agree to the license terms. On the ?¡ãWhat would you like to do’¡À screen, click ?¡ãCreate installation media for an additional PC?¡À, then select ‘Next’. Choose the language, edition and 32-bit or 64-bit, then select either ‘USB flash drive’ or ISO file’, depending on whether you’re installing from a USB or from a DVD (select ISO for that latter).
When the tool has formatted and come up with installation drive, you can restart your computer, boot in the drive and install the Windows 10 October 2018 Update from scratch. Our How to install Windows 10 guide will show you how.
How to fix Windows 10 October 2018 Update Media Creation Tool problems
The Media Creation Tool is really a handy app produced by Microsoft that permits you to install the Windows 10 October 2018 Update utilizing a USB drive or DVD. However, many people have encountered problems when using it.
When the Media Creation Tool gets stuck when you’re trying to download the Windows 10 October 2018 Update files, try closing and reopening the Media Creation Tool app. When the app has downloaded the files, quickly disconnect your PC in the network (either take away the Ethernet cable or switch off your Wi-Fi adapter).
Cellular phone should continue (without checking the internet for additional files) and when it’s complete you are able to reconnect to the web. Finally, open up Windows Update (Settings > Update & Security > Windows Update) and click on ‘Check for Updates’ to download the final files.
Many people are experiencing a ‘DynamicUpdate’ error message while using the Media Creation Tool. To fix this, open File Explorer and go to C:\$Windows.~WS\Sources\Windows\sources.
You need to see an app called Setupprep.exe. Double-click it to produce the update program.
How to fix corrupted ISO problems with Windows 10 October 2018 Update
If you’re trying to install the Windows 10 October 2018 Update utilizing an ISO file, and you’ve encountered an error numbered 0x8007025D – 0x2000C, this implies that the Windows 10 October 2018 Update may be corrupted.
If this happens, try downloading the ISO file again, then run the Media Creation Tool again to create a bootable USB or DVD and check out again.
How you can fix ‘The update isn’t applicable to your computer’ error
By trying to install the Windows 10 October 2018 Update and also you have an error message that reads ‘The update isn’t applicable to your computer’, then you’ll need to make sure you’ve all the latest Windows updates installed.
To get this done go to Settings > Update & Security > Windows Update and then click ‘Check for updates’. Install all the updates which are found, then try installing the Windows 10 October 2018 Update again.
How you can fix issues that stop Windows 10 October 2018 Update from finishing the install
There’s anything frustrating than seeing an update seemingly install with no problem, and then getting a mistake message at the last moment.
Many people are reporting that they’re seeing ‘Error: We couldn’t complete the updates. Undoing changes. Don’t turn off your computer’ and ‘Error: Failure configuring Windows Updates. Reverting changes’ messages, which prevent Windows 10 October 2018 Update from finishing the install process.
You can check to determine what went wrong by go to Settings > Update & Security > Windows Update and clicking ‘Update history’.
This should demonstrate any problems that were encountered. Take note of these, then search the internet for a solution.
Repair your hard drive if Windows 10 October 2018 Update
If Windows 10 October Update is can not install, you should check your hard disk for errors. To get this done, you need to use the CHKDSK command within the command prompt.
Type “command prompt” into the search engine within the taskbar, right-click “Command Prompt” and choose “Run as administrator”.
If this opens enter in the following, then press Enter on your keyboard:
chkdsk/f c:
You might be inspired to press Y or Enter in your keyboard to verify the check. Let it run, and if any errors are located, do as instructed to repair them.
How you can uninstall Windows 10 October 2018 Update
If you are still encountering problems with the Windows 10 October 2018 Update, or else you don’t like the changes Microsoft makes, then you can uninstall the October 2018 Update and revert to a previous version of Windows.
We wouldn’t actually advise carrying this out, as you may miss out on future security updates from Microsoft, but when you would rather return until all of the bugs and problems with the Windows 10 October 2018 Update continues to be fixed, then follow these steps.
First, visit Settings > Update & security > Recovery and then click ‘Get started’ under where it says ‘Go back to the previous form of Windows 10’.
A window can look asking you the reason why you want to revert to a previous version. Answer the question (this helps Microsoft improve future versions of Windows), then click ‘No, thanks’ from the next window. This is when it asks you if you want to check for any updates.
Click ‘Next’ on the window that follows, then ‘Next’ again, ensuring you’ve your Windows sign in details handy. Finally, click ‘Go to earlier build’ and also the Windows 10 October 2018 Update will uninstall.
If you wait Ten days to uninstall the Windows 10 October 2018 Update, you might find the option is finished. Unfortunately, the only way to uninstall the October 2018 Update next would be to perform a fresh install of Windows 10 utilizing an ISO file of an older version.
