How to locate Which Program Using Most RAM in Windows 10

If the Windows 10 memory usage is high, you should use the job manager to find which application or program is using probably the most RAM or Memory. Here’s how.

Every program running in Windows requires a certain amount of RAM (Random Access Memory) or Memory to function. In the event you don’t know, RAM is temporary or volatile storage used by programs to keep temporary data like current settings, workflow, unsaved data, etc. Generally, the RAM is often faster than your hard disk drive or SSD. As a result, programs require this memory to operate properly. If a program is using up all the available RAM, other programs might not be in a position to function properly due to low RAM. Inside a worst-case scenario, the program or operating-system itself might crash because of low RAM.

Most systems nowadays have a minimum of 8GB of RAM. For general day-to-day pursuits like browsing, office work, and media consumption, that of RAM will suffice. However, if you are running intense programs like Photoshop or playing games, you need to keep close track of Windows 10 RAM usage. This is particularly important for systems with 8GB or less RAM. If your certain program is using too much RAM, you can end it prior to it going unmanageable or makes other programs slow. This way, you can reduce RAM usage in Windows 10.

Instead of wondering what’s using all my RAM, you can find which program is applying all or most RAM in Windows 10 in just a few steps. Here are the precise steps you should follow to discover programs using excessive RAM.

Using Task Manager to locate Programs Using Most RAM

The built-in task manager in Windows 10 can certainly show what app is applying all or the majority of the memory. To do that, open the job manager, to go the “Processes” tab, and then click the “Memory” going to sort by programs using most RAM. Below are the detailed steps you need to follow.

First, right-click on the Taskbar.
From the list, select “Task Manager” to spread out the Task Manager.
In the Task Manager, visit the “Processes” tab.
Once you are here, click the “Memory” heading.
Once you click on it, the Task Manager will sort by processes while using most RAM.
So, you will see the procedure or program that’s while using most RAM at the top of their email list. In my case, Chrome using most memory compared to others.

Once you discover the procedure or program accountable for hogging all of the RAM, you can either force quit the application or lessen the workload for the reason that specific program. Doing these two actions will reduce RAM using the target program.

Important Note: Do remember when you forcefully quit a credit card applicatoin to free RAM, you may lose any unsaved data. So, I recommend you manually save the information and then close the application rather than ending the process from the task manager. Only force quit when the application is not responding.

That’s all.

How to See Application Power Usage in Task Manager

The brand new option within the task manager lets you begin to see the current and overall power usage of a process or application. Listed here are the steps to see energy usage in task manager.

Every application in Windows, whether it is running within the foreground or background, uses some amount of power. Depending on what the application is doing, the ability usage will be very high, high, medium, or low. For example, if you are encoding a video, the ability using the encoder application will be high when compared with other processes like your browser. On laptops, the higher the power usage is, the lower will be the life of the battery. So, you should monitor the applying power usage on Windows 10. If a certain application’s power usage is high, timely monitoring will help you stop it from draining the battery.

Thankfully, the job Manager on Windows 10 has a neat little feature that displays the Power Usage and Power Usage Tread of every running process or application. By using their, it is simple to determine whether an application’s energy usage is low, medium, high, or very high and take steps accordingly.

Without further ado, allow me to demonstrate the steps to see power usage within the task manager on Windows.

Steps to See Power Usage in Task Manager on Windows 10

To determine the power usage details of a procedure within the task manager, stick to the steps below.

Open the task manager.
Go towards the “Processes” tab.
Right-click on any section heading.
Select the “Power usage” checkbox.
Select the “Power usage trend” checkbox.
You will see the new Energy usage and Power Usage Trend coloums to the right.

Detailed Steps

1. First, we need to open the Task Manager. So, right-click on the taskbar and select the “Task Manager” option. This can open the Task Manager. You can also open it with the “Ctrl + Shift + Esc” shortcut.

2. After open the Task Manager, choose the “Processes” tab. This is when you will find all of the running processes and applications.

3. Because the Power Usage and Energy usage Trend are new options, they might not show on your machine. So, we have to make those columns visible. To achieve that, right-click on any section heading.

4. From the right-click options, select both “Power Usage” and “Power Usage Trend” options.

5. After enabling the choices, you will notice the ability Usage and Power Usage Trend coloums to the right side of the Processes tab.

With respect to the energy usage of the process, the ability usage and energy usage trend columns are updated in realtime. By monitoring these columns, you can easily identify the power hungry processes right away.

Difference Between Energy usage and Power Usage Trend

Though both Power Usage and Power Usage Trend sounds and appears exactly the same, they both represent various things.

Power Usage shows the present or real-time energy usage by the target process or application. Depending on exactly what the application does right now, the power usage will be between low, medium, high, or very high.

Power Usage Trend shows the long term energy usage from the target process or application. For instance, when the process is running for Half an hour, the ability Usage Trend can have the typical energy usage trend for the reason that amount of time. When the energy usage trend is high or high, it means that concentrate on process is using lots of power for some time. Generally, resource intensive applications like video editors, image editors, 3D applications, recording applications, etc., will have overall medium to high power usage trends.

That’s all.

How to Show Taskbar on All Displays in Multi-Monitor Setup

In a multi-monitor setup, Windows enables you to show the taskbar on all monitors. The option is configurable by the Settings app. Here’s how.

With all the work-from-home going on all over the world, the multi-monitor setups are increasing day by day. Probably the most common combinations as being a laptop linked to another monitor. After all, working on a small screen for very long amounts of time isn’t that easy. The problem is compounded by many times if you have to switch between multiple applications or windows on the small 13-15 inch screen.

When multiple displays are connected to your computer, Windows 10 is fairly good at configuring the DPI scaling from multiple displays. If needed, Windows even enables you to show the taskbar on all displays. As the majority of you know, the taskbar in Windows is a vital tool that lets you quickly access any pinned or opened application(s). Depending on your system configuration, Windows might show or hide the taskbar.

If you cannot begin to see the taskbar around the second display or any other connected monitors, you have to configure the taskbar settings within the Settings app to exhibit the taskbar on all monitors. Thankfully, it is pretty simple to do. Allow me to show you show.

Steps to show taskbar on all displays

To show the taskbar on all displays, follow the steps the following.

Open the Settings app in Windows 10.
Select the “Personalization” option.
Click on the “Taskbar” tab on the sidebar.
Select “All taskbars” in the “Show taskbar buttons on” option underneath the “Multiple displays” section.
Close the Settings app.

The taskbar will instantly appear on all connected and active monitors.

Detailed steps

1. Access the settings app with the “Windows Key + I” shortcut. You can also look for Settings in the Start menu or click the Settings icon on the taskbar.

2. Within the Settings app, go to the “Personalization” page. In the personalization page, choose the “Taskbar” tab around the sidebar. This is when you’ll find all of the taskbar settings in Windows 10.

3. Around the right page, scroll down and discover the “Multiple displays” section. From here, select the “All taskbars” option in the dropdown menu underneath the “Show taskbar button on” heading.

4. Settings are automatically saved. Just close the Settings app after selecting the option as shown above.

In the future, you will see the taskbar on all displays. If you don’t begin to see the changes immediately, I recommend you restart explorer or restart the system.

The main display may have the quick launch tray however the other displays is only going to possess the clock on the right-hand side of the taskbar. As of this moment, Windows 10 has no option to show the quick launch tray on all displays. Also, the taskbar icons size. i.e, small or big icons, depends upon the main taskbar settings. It’s impossible to change the taskbar icons size for a person monitor. So, with respect to the DPI setting from the monitors, the taskbar icons may appear too large or small. In that case, all you are able do is choose the best possible setting for the monitor configuration.

How to Set Different Wallpaper for Each Display (multi-monitor)

If you have a dual or multi-monitor setup, you can set a different wallpaper for each display. Here is how it can be done in Windows 10.

If you work with multi-monitor setup with two or more displays connected to the computer, you can configure Windows 10 to exhibit a different wallpaper on each display. If you are into customizing and personalizing your multi-monitor setup, the ability to set different wallpapers on several displays is hugely helpful and pretty powerful too. I mean, I’ve seen the creativity which goes into establishing wallpapers on several displays in a multi-monitor setup.

In older versions of Windows, you are forced to use third-party software or edit system files or registry to change wallpaper on extended displays. That changed in Windows 10. Though not obvious at the first glance, you can set different wallpapers on dual monitors directly from the Personalization page in the Settings app.

In this quick and simple article, allow me to demonstrate the steps essential to set different wallpaper for each display on the dual monitor or multi-monitor setup.

Steps to create different wallpaper for every display

Stick to the steps below to create different wallpaper for every display in a multi-monitor setup.

Open the Settings app.
Select the “Personalization” option.
Click around the “Background” tab around the sidebar.
Select “Picture” in the “Background” dropdown menu.
Now, right-click on any wallpaper below the dropdown menu.
Select the “set for monitor 1” option to apply the wallpaper towards the primary monitor.
Next, right-click on another wallpaper.
Select the “set for monitor 2” choice to use the wallpaper towards the secondary monitor.
If you’ve a lot more than two monitors, do this same task for other displays.
Close the settings app.

Detailed steps

1. First, open laptop computer Settings app with “Windows + I” keyboard shortcut. Within the Settings app, visit the “Personalization ?¨² Background” page. This is where there is a choice to change Windows wallpaper.

2. On the right page, select “Picture” from the “Background” dropdown menu. This course of action will show five newest wallpapers right under the dropdown menu.

3. Right-click on the wallpaper of your liking. If you fail to find the wallpaper you are looking for, click the “Browse” button under the wallpapers to add it to the list.

4. In the right-click menu, choose the “Set for monitor 1” to set the chosen wallpaper on your primary or first display.

5. Next, right-click on another wallpaper. In the right-click menu, choose the “Set for monitor 2” option. As before, if you fail to discover the wallpaper, click the “Browse” button and select the wallpaper from your hard disk drive.

6. For those who have more monitors, follow the same steps and set another wallpaper for each display.

That is all. With that, you’ll have different wallpapers for every of the displays within the multi-monitor setup.

Multi Monitor Wallpaper Slideshow

You can also make Windows to automatically display different wallpapers on different monitors. To do that, select “Slideshow” from the dropdown menu without anyone’s knowledge page on the Setitngs app. Next, select the wallpaper folder in your hard disk by clicking on the “Browse” button under the “Choose albums from your slideshow” section. If you wish to, you can add multiple folders too.

How to Show NUM Lock & CAPS Lock Indicator on Taskbar

In case your keyboard or laptop doesn’t have num lock or caps lock status indicators, you are able to show the Num Lock and Caps Lock status indicators on the taskbar.

Most keyboards and even some laptops have indicator lights for special keys like the num lock, caps lock, and scroll lock. For example, the num lock lets you type numbers with the number pad, the caps lock enables you to key in all capitals, and also the scroll lock lets you scroll text windows. When a special secret is toggled ON, the related light will turn ON. This enables you to realize that the special key is engaged. For instance, whenever you press the num lock key on your keyboard, the num lock indicator light will either switch on or off according to its previous state.

As possible guess, one of the main functions of the num lock and caps lock indicator lights is it informs you when the keys take presctiption or Off at a glance. However, some keyboards and laptops might possibly not have the num lock indicator light or even the caps lock indicator light. In those cases, you may make Windows show num lock and caps lock status indicators around the taskbar’s system tray. That way, you will instantly know if the num lock or caps lock is switched on or off.

Within this quick and simple guide, allow me to show how to show num lock and caps lock status indicators around the taskbar system tray in Windows 10.

Steps to exhibit NUM Lock and CAPS Lock indicator on taskbar system tray

To exhibit the num lock and caps lock status indicators on the taskbar, we are going to make use of a free software called TrayStatus. The applying is pretty lightweight and simple to use.

1. First, get TrayStatus from here. After downloading, double-click on the exe file and follow the installation wizard to install it. Though the application has some advanced paid options, the status indicators a free to use.

2. After installing the applying, open it up. You can do that by double-clicking on the desktop shortcut or by trying to find TrayStatus in the Start menu.

3. When the TrayStatus application has been opened, the first thing you must do is make sure it comes down to Windows. To achieve that, click the “Options” tab on the sidebar. Next, choose the “Start with Windows” checkbox.

4. After that, click the “Status Indicators” tab around the sidebar. This is when you are able to enable or disable a wide range of status indicators such as the num lock and caps lock.

5. In this article, select both the “Show caps lock status” and “Show num lock status” checkboxes. You will find these checkboxes towards the top of the Default Indicators section.

6. Finally, click on the “Apply” and “Ok” buttons to save the changes.

That is it. From now on, you will see the num lock and caps lock indicators in the system tray of the taskbar. When the num lock and/or caps lock is switched on, you will see filled-in taskbar status indicators. When the lock keys are switched off, you will notice outlined status indicators.

Conclusion

Since the TrayStatus is added to the Windows startup list, you will notice the num lock and caps lock taskbar status indicators once you log into your system.

How to Disable Camera in Windows 10 (laptop webcam)

If you are not using the camera or laptop webcam, you can completely disable it. Listed here are the steps to disable camera in Windows 10.

For those who have a laptop or desktop with a webcam, you know that just about any application in Windows can access it. This is extremely helpful since you can use the camera to video chat with your friends or even live stream. To safeguard you from any unauthorized activity, Windows 10 includes a permission manager that lets you restrict apps from accessing your camera. However, Windows 10’s permissions aren’t as polished and are not respected by many people old and new win32 applications.

When you are not actively using the camera, along with restricting applications, it is important that you switch from the camera. However, should you never make use of the camera, you can completely disable it in Windows 10. Disabling the camera ensures no app can access it without you explicitly enabling it back.

Within this simple and quick guide, allow me to get you although the steps to disable camera in Windows 10.

Switch off camera in Windows 10 settings

You can turn off camera in Windows 10 from the Settings app. Though not obvious at first glance, it’s pretty easy to do. Listed here are steps to follow.

1. First, open the Settings application in Windows 10. You can do that by trying to find “Settings” in the Start menu or by clicking the “All Settings” button in the notification center.

2. After opening the Settings app, visit the “Privacy” page. This is when you will find all the privacy related choices for various parts and applications in Windows 10.

3. On the Privacy page, click the “Camera” tab on the sidebar. As you expect, this is where all of the permissions regarding the camera can be found.

4. Now, click the “Change” button under “Allow access towards the camera about this device” section.

5. Turn off “Camera access for this device” option in the flyout menu.

6. Close the Settings app.

With this, you’ve switched off the camera via the Settings app in Windows 10.

Disable camera in Windows 10 device manager

If you wish to completely disable Windows 10 camera and ensure no application can access it, you need to disable camera in the Device Manager. Here’s how.

1. First, right-click on the Start menu and then click the “Device Manager” option. You may also look for it within the Start menu.

2. After opening the Device Manager, double-click around the “Cameras” choice to expand it. You will see all your cameras under this method.

Note: If you do not see the Cameras option or any camera device under the Cameras option, your system might not have a camera. If you’re sure you have one, it might not identified by Windows or it might not be working because it should.

3. Now, right-click on the camera device and select the “Disable device” button.

4. If you notice a warning window, click on the “Yes” button.

As soon as you read the action, Windows will completely disable your camera in Device Manager. You will notice a little down arrow icon on the device icon in the device manager.

If you wish to let the camera back on, right-click on the camera tool and select the “Enable device” option.

How to Disable Windows Hello in Windows 10

If you don’t desire to use Windows Hello authentication, you are able to disable it in Windows 10. Follow these steps to disable Windows Hello.

All Windows 10 devices have some form of Windows Hello authentication. As of this moment, you will find four main types of Windows Hello authentication. They’re facial recognition, fingerprint scanning, pin protection, and a security key. The point of Windows Hello is to make you log to your user account without using the password. i.e. make password-less login a norm.

Depending on your system, you should use anyone or all kinds of Windows Hello authentication to secure Windows 10.

As good as Windows Hello is, there might be times when you have to disable it. For example, you may want to enable Windows 10 auto login, or maybe you don’t believe in biometric data with Windows 10.

No matter the reason, if you don’t need it, you are able to disable Windows Hello. There are two ways to do it. First using the Group Policy and 2nd using the Registry Editor. I will show both these methods follow the one appropriate for you.

Disable Windows Hello in Group Policy

Step 1: Open the Group Policy Editor. To do that look for “gpedit.msc” in the Start menu and then click looking result.

Step 2: Expand the pc Configuration folder around the sidebar and choose the “Administrative Templates → Windows Components → Biometrics” folder.

Step 3: Double-click around the “Allow using biometrics” policy in the right panel. This is the policy to enable or disable Windows Hello.

Step 4: Select the “Disabled” choice to disable Windows Hello biometrics.

Step five: Click the “Ok” button in the policy properties window in order to save changes.

Step six: Finally, restart Windows 10. This will apply the changes. If you do not want to restart, execute “gpupdate /force” command as admin.

That’s it. With this, you’ve disabled Windows Hello. From now on, you can’t use Windows Hello biometric authentication. If you go to the Sign-in Options page in the “Settings → Accounts” page you will see the “Some settings are hidden or managed by your organization” or “This choice is currently unavailable” message.

To enable Windows Hello in Group Policy, choose the “Not configured” option in the “Allow the use of biometrics” properties window.

Disable Windows Hello in Registry Editor

Step 1: Open the Registry Editor. To achieve that, open the Run window with the “Windows key + R” shortcut, type “regedit” and click “Ok”.

Step 2: Paste the below path in the Registry Editor’s address bar and press Enter. This will open the Biometrics folder within the Registry Editor.

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Biometrics

When there is no “Biometrics” folder, create one by right-clicking on the “Microsoft” folder and select “New → Key”.

Step 3: Try to find the “Enabled” value around the right page. If cannot, right-click on the “Biometrics” folder, select “New → DWORD Value”, and name it “Enabled”.

Step four: Double-click around the “Enabled” value, type “0” in the Value Data field, and click “Ok”.

Step 5: Finally, close the Registry Editor and restart Windows 10.

After restarting, providing have the ability to enable Windows Hello biometrics. i.e. the Registry Editor removed the Windows Hello biometric authentication.

To allow it back, type “1” within the Enabled DWORD value (Step four).

Note:

The above settings will only disable biometric authentication. i.e. facial recognition and fingerprint scanning. To remove the pin protection, click on “Windows Hello Pin” on the Sign-in Options page after which click on the “Remove” button. That you can do the same thing for the Security Key and movie Password.

How to Completely Disable Windows 10 Notifications

Can’t stand notifications at inopportune times? Here’s how you can completely disable app notifications in Windows 10.

Unlike the prior versions, Windows apps don’t need to have their own notification system. They are able to make use of the built-in notification center to show all sorts of notifications. As possible guess, the notification center makes it easy to help keep tabs on and manage all notifications in one place.

As good as the new notification product is, some apps show constant notifications distracting you from the particular work. This may reduce your overall productivity.

In that case, here is how to disable Windows 10 notifications completely.

Disable Windows 10 Notifications

When it comes to disabling notifications, Windows 10 gives you a good bit of control. For instance, you may either turn off notifications for specific apps or disable notifications entirely. i.e, for those apps either with the help of the Settings app or the Group Policy Editor. I’ll show all three methods. Make use of the one you’ll need.

Note: If you are looking to temporarily disable app notifications, you are able to enable Focus Assist. To turn on Focus Assist, click on the taskbar Notifications icon and click on the “Focus Assist” button. Focus Assist will automatically turn off itself after a few hours. To show them back manually, click on the button again.

Disable notifications for specific apps

Turning off individual app notifications is useful if you have an application that’s constantly showing notifications for unnecessary things like offers, events, etc. A good example of this kind of behavior could be gaming and social media apps.

1. To disable individual app notifications, open the Settings app by pressing the keyboard shortcut Win + I. Alternatively, click the Notifications icon after which click on the “Settings” button.

2. Visit “System -> Notifications and Actions” in the Settings app.

3. Around the right panel, scroll down and you’ll see all of the “Get notifications from all of these senders” section. This lists all of the apps that may show notifications. Here, “Turn off” an application to disable notification access for your particular application.

That’s it. You’ve disabled Windows 10 notifications from specific apps.

To enable notifications again to have an app, toggle the switch to “On” and you’re simply done.

Disable All App Notifications on Windows 10

Disabling all Windows 10 notifications is useful whenever you don’t wish to be bothered with any app notifications whatsoever.

1. Open Settings while using shortcut Win + I. You may also look for it within the start menu.

2. Visit the “System -> Notifications and Actions” page in the Settings app.

3. Switch off the “Get notification from apps along with other senders” option. There is a option underneath the Notifications section within the right panel.

As soon as you turn off the setting, providing get any notifications either in the notification center or on the lock screen.

To allow the notifications again, turn on “Get notification from apps and other senders.”

Disable Windows 10 Notifications with Group Policy GPO

If you want to completely disable Windows 10 notifications then your group policy editor may be the way to go. This method is particularly useful for system administrators or maybe have multiple computers to manage.

1. First off, Open the audience Policy Editor. To do that, look for “gpedit.msc” within the start menu and then click the very best result.

2. Go to the “User Configuration -> Administrative Templates -> Start Menu and Taskbar” folder within the Group Policy Editor.

3. Double-click around the “Remove Notifications and Action Center” policy. There is a policy within the right panel.

4. Select “Enabled” in the policy properties window. Click the “Apply” and “Ok” button in order to save the changes.

That’s it.

Keep in mind that some apps can still show notifications even when you turn off notifications. This is because these apps use their own notification system rather than using the one supplied by Windows 10. You can observe this type of behavior in applications like antivirus and firewall. In those cases, you have to disable notifications for your app by changing its settings.

Windows 10: Turn OFF Mouse Acceleration

Mouse acceleration causes accuracy issues in precision work and games. Here are the steps to totally turn off mouse acceleration on Windows 10.

Windows automatically enables the mouse acceleration feature called Pointer Precision. As you can tell in the feature name itself, the Pointer Precision feature enhances the overall mouse acceleration to make it feel a little more natural and easy to use. Windows performs this by changing a button DPI quickly. That is a primary reason why whenever you mouse make use of your mouse faster, the pointer will travel a greater distance. Of course, the alternative is also true in which the pointer travels less when you move your mouse slowly.

Put simply, the mouse acceleration in Windows changes the pointer speed for the way fast you are moving a button.

Within this simple and quick guide, let me show the steps to totally turn off mouse acceleration on Windows.

Why disable mouse acceleration?

Although the “Enhance Pointer Precision” a.k.a “Mouse Acceleration” feature is extremely useful in daily usage, it’s really a hindrance sometimes. For instance, mouse acceleration causes accuracy issues in Windows shooter games. One of many reasons for this really is Windows changing the mouse pointer acceleration constantly depending on your mouse movement speed and DPI settings. This constant transfer of speed makes it difficult to gauge accuracy and develop muscle memory.

So, if you’re a gamer or somebody that does precision work with a button, you need to switch off a button acceleration in Windows. Disabling a button acceleration gives you better treatments for the pointer speed and accuracy.

How to switch off mouse acceleration

To turn off mouse acceleration stick to the steps given below.

Open the Windows 10 Settings app.
Click on the “Devices” option.
Select the “Mouse” tab on the sidebar.
Click on the “Additional mouse options” under “Related settings”.
Select the “Pointer Options” tab within the mouse properties window.
Uncheck the “Enhance pointer precision” checkbox.
Click the “Apply” button.
Click the “Ok” button.

Detailed steps

You are able to disable the mouse acceleration from Mouse Properties window.

First, open the Settings app by pressing the “Start key + I” shortcut or by hitting the “All Settings” button in the Notification Center. In the Settings app, visit the “Devices” page and choose the “Mouse” tab around the sidebar. This is when the majority of the mouse related choices are located.

On this page, click on the “Additional mouse options” link underneath the “Related settings” section. You’ll find this feature on the right sidebar or at the end of the settings page.

The above mentioned action will open a button Properties window. Here, visit the “Pointer Options” tab. As you can tell from the name, this is where you will find choices to control the way the pointer behaves.

A quick tip: You can use the main.cpl Run command to open the Mouse Properties window.

In this tab, uncheck the “Enhance pointer precision” checkbox. Next, click the “Apply” and “Ok” buttons to save the alterations.

turn off mouse acceleration – enhance pointer precision

That’s it. Using the above steps, you’ve disabled a button acceleration on Windows 10.

Based on your mouse DPI settings, you might have to alter the pointer speed to satisfy your use case. You are able to change the mouse pointer speed directly from the Pointer Options tab in the Mouse Properties window. Make use of the slider under “Select a pointer speed” to alter the pointer speed. Once satisfied with the changes, click “Ok” to save changes.

How to Show NUM Lock & CAPS Lock Indicator on Taskbar

In case your keyboard or laptop has no num lock or caps lock status indicators, you are able to show the Num Lock and Caps Lock status indicators around the taskbar.

Most keyboards and even some laptops have indicator lights for special keys like the num lock, caps lock, and scroll lock. For example, the num lock enables you to type numbers with the number pad, the caps lock enables you to type in all capitals, and the scroll lock lets you scroll text windows. Whenever a special key is toggled ON, the related light will turn ON. This enables you to realize that the special key is engaged. For example, whenever you press the num lock key on your keyboard, the num lock indicator light will either turn on or off based on its previous state.

As possible guess, one of the main functions of the num lock and caps lock indicator lights is it lets you know if the keys take presctiption or Off at a glance. However, some keyboards and laptops might not have the num lock indicator light or the caps lock indicator light. In those cases, you may make Windows show num lock and caps lock status indicators on the taskbar’s system tray. This way, you will instantly know if the num lock or caps lock is turned on or off.

In this simple and quick guide, allow me to show how you can show num lock and caps lock status indicators on the taskbar system tray in Windows 10.

Steps to exhibit NUM Lock and CAPS Lock indicator on taskbar system tray

To show the num lock and caps lock status indicators around the taskbar, we are going to use a free software called TrayStatus. The applying is pretty lightweight and simple to make use of.

1. First, get TrayStatus came from here. After downloading, double-click around the exe file and stick to the installation wizard to set up it. Although the application has some advanced paid options, the status indicators a totally free to use.

2. After installing the applying, open it up. You can do that by double-clicking on the desktop shortcut or by searching for TrayStatus in the Start menu.

3. Once the TrayStatus application has been opened, the very first thing you must do is make certain it comes down to Windows. To achieve that, click on the “Options” tab around the sidebar. Next, select the “Start with Windows” checkbox.

4. After that, click on the “Status Indicators” tab around the sidebar. This is where you can enable or disable an array of status indicators including the num lock and caps lock.

5. In this article, select both “Show caps lock status” and “Show num lock status” checkboxes. You will find these checkboxes at the top of the Default Indicators section.

6. Finally, click the “Apply” and “Ok” buttons in order to save the changes.

That’s it. In the future, you will see the num lock and caps lock indicators in the system tray of the taskbar. If the num lock and/or caps lock is turned on, you will notice filled-in taskbar status indicators. If the lock keys are switched off, you will notice outlined status indicators.

Conclusion

Because the TrayStatus is put into the Windows startup list, you will see the num lock and caps lock taskbar status indicators as soon as you log into your system.